News
21 Point Service & Re-Build Checklist
Posted by Danny Campbell on
This is the 21-point service & re-build checklist performed on every ski machine we sell. We re-build from scratch starting from the inside out - every nut, every fitting, every tiny spring clip...EVERYTHING! 1. Remove, refinish and refit all wood parts.2. Remove, clean or re-paint (paint as needed) all framing, metal parts & BLACK hardware. Clean - Polish - Replace as needed.3. All hardware to be cleaned, polished, oiled or replaced.4. Corner rollers & axle/pins removed, polished, re-set (Legacy units) and lubricated internally to prevent future corrosion and smooth non-rattle performance.5. Check & gap / align drive rollers. Replace as needed6. Remove & Disassemble Arm...